Palomeque Gutter LLC — Seamless Gutter Specialists in Des Moines, IA
Roofing & Roof-Edge Repair service in Des Moines, IA by Palomeque Gutter LLC

Custom Seamless Aluminum

Roofing & Roof-Edge Repair in Des Moines, IA

Roof repairs, shingle restoration, drip edge, and eave sheathing repair in Des Moines backed by licensed exterior craftsmanship. (321) 485-9911

  • 4.9★ from 45 Google reviews
  • Iowa SOS LLC #636243
  • Serving Des Moines & Central Iowa Since 2020
  • 0.032 Heavy-Gauge Seamless Aluminum
  • Free on-site written estimates
  • Same-day storm & emergency response
  • Workmanship Guarantee on All Custom Seamless Installations & Repairs

The roof edge is the single most vulnerable zone of your home's exterior shell. At Palomeque Gutter LLC, our experienced craftsmen provide specialized roofing contractor des moines, delivering precision shingle repairs, eave sheathing reconstruction, and code-compliant drip edge installations. Founded by Peter Palomeque in 2020 with exterior craftsmanship roots dating to 2014, our licensed company bridges the critical gap between roofing and gutter drainage across Greater Des Moines.

Central Iowa weather subjects residential roof edges to severe stress. Convective summer storms bring 70+ mph winds and hail that crease shingles and tear flashings. In winter, freeze-thaw cycles form ice dams forcing meltwater under shingles. Without ice-and-water shield and heavy drip edges, water rots decking, rafter tails, and attic insulation. Professional roofing contractor des moines restores structural roof integrity and eave water protection.

Peter Palomeque and crew performing roofing & roof-edge repair in Des Moines, IA
Precision roof-edge repair and flashing inspection on a residential home in Greater Des Moines.

Complete Roofing & Roof-Edge Repair Solutions in Des Moines

We do not believe in superficial caulking when roof decking or shingles are compromised. Palomeque Gutter LLC diagnoses the root cause of water intrusion, restoring roof planes to manufacturer specifications:

  • Targeted Architectural Shingle Replacement: Replacing wind-torn, hail-bruised, or missing fiberglass asphalt shingles with exact color-matched manufacturer products.
  • Eave Decking & Plywood Sheathing Repair: Cutting out rotted, soft, or delaminated OSB decking along roof eaves and installing fresh exterior-grade CDX plywood.
  • IRC-Compliant Metal Drip Edge Installation: Fastening heavy-gauge aluminum or galvanized drip edge and gutter aprons that direct runoff cleanly into gutter troughs.
  • Ice-and-Water Shield Membrane Application: Applying self-adhering polymer-modified bitumen underlayment along eaves and valleys for total ice dam defense.
  • Valley Flashing & Dormer Reconstruction: Re-lining concentrated water channels with heavy W-valley metal flashings and custom sidewall step flashing.
  • Plumbing Vent & Flashing Boot Replacement: Replacing cracked neoprene pipe boots, chimney counter-flashings, and exhaust vent seals that cause interior ceiling leaks.

5 Warning Signs of Roof-Edge Failure and Shingle Deterioration

Roof leaks frequently start unnoticed at roof edges and valleys, traveling down interior wall studs before appearing as drywall stains. Watch for these five warning signs of roof deterioration:

  1. Curled, Lifted, or Missing Shingles Near Eaves: Strong thunderstorm winds catch lower roof courses, snapping brittle asphalt tabs and exposing underlayment to driving rain.
  2. Spongy, Soft, or Dipping Roof Decking Along Eaves: Walking along roof edges that feel soft underfoot indicates chronic moisture has rotted the underlying plywood sheathing.
  3. Interior Water Rings on Exterior-Wall Ceilings: Brown mineral stains near outer drywall corners during winter prove that ice dams have backed water beneath shingles.
  4. Water Streaking Behind Fascia Boards: Paint peeling from fascia lumber reveals that water is slipping between the roof deck and the back gutter lip due to missing flashing.
  5. Granule Accumulation in Gutter Troughs: Heavy accumulations of mineral granules in gutters indicate that aging shingles have lost their protective UV coating and are nearing failure.
Custom continuous seamless aluminum roofing & roof-edge repair profile on Central Iowa roofline
Architectural shingles and drip edge apron installed in seamless alignment with aluminum gutters.

Construction Standard Comparison: Standard Gutter Companies vs. Integrated Roof Craftsmen

Most gutter companies know nothing about roofing, while many roofers treat gutters as an afterthought. The table below illustrates the advantage of partnering with an integrated exterior craftsman:

Feature SpecificationStandard Gutter-Only InstallerPalomeque Gutter LLC Integrated Roofing StandardPractical Advantage for Homeowner
Drip Edge InspectionFrequently ignored; hung below missing flashingVerifies IRC-compliant drip edge on every projectStops capillary water wicking and protects wood sub-fascia
Decking Rot RepairLeaves rotted decking untouched beneath eavesCuts out soft plywood; installs new CDX deckingGuarantees solid structural nailing for shingles and fascia
Ice Dam ProtectionOnly treats symptoms after ice builds upInstalls self-adhering ice-and-water barrier along eavesPrevents meltwater from backing up into attic insulation
Valley Flashing IntegrationPins gutters blindly across valley dischargeEngineered valley splash shields and custom flashingsManages high-velocity water runoff without eave overshooting
Shingle Fastening SafetyOften lifts shingles carelessly, cracking tabsProper roofing hand tools protect shingle seal stripsPreserves manufacturer shingle wind warranties
Workmanship AccountabilityBlames roofers for leaks behind guttersSingle accountable trade partner for eave & rooflineOne phone call resolves all exterior roofline water issues

Our 6-Step Roof-Edge Repair and Shingle Restoration Protocol

Palomeque Gutter LLC executes roof repairs with exacting craftsmanship to ensure long-term weatherproofing:

  1. Attic & Eave Moisture Audit: We inspect the roof surface and attic space to identify active leaks, rotted sheathing, and damaged underlayment.
  2. Selective Shingle De-Nailing: Using specialized flat pry bars, we gently break sealant strips and remove nails from damaged shingles without tearing adjacent tabs.
  3. Decking Extraction & Replacement: We cut out decayed wood decking back to center rafter supports, nailing new exterior-grade CDX plywood flush with existing decking.
  4. Ice Barrier Membrane Application: We apply self-adhering ice-and-water shield directly to the clean wood deck, extending it past the interior wall plane.
  5. Drip Edge & Starter Shingle Interlocking: We nail heavy-gauge aluminum drip edge over the underlayment and install starter shingles to create a wind-resistant edge seal.
  6. Shingle Re-Installation & Magnetic Sweep: We nail replacement shingles with galvanized roofing nails, hand-seal tabs, and sweep the entire yard with magnets.
Family Owned & Operated Since 2020

Protect Your Roof and Eaves from Costly Water Intrusion

Call Peter Palomeque today at (321) 485-9911 for direct owner consultation, honest roof assessments, and fast scheduling across Greater Des Moines.

Custom Roll-Formed On SiteQuotes Same Day / 24-48h4.9★ Google Business Profile
Call (321) 485-9911

Direct to Peter & crew · No automated call center

Downspout routing and drainage discharge for roofing & roof-edge repair project
Downspout and roofline drainage discharge carrying storm runoff safely away from residential foundation.

Roofing & Roof-Edge Repair Costs in Des Moines and Polk County

Roof repair costs vary based on roof pitch, access difficulty, decking damage, and materials required:

  • Targeted Shingle Repair (1 to 2 Bundles): Replacing wind-damaged or missing shingles and resealing tabs typically ranges from $250 to $450.
  • Eave Decking & Sheathing Replacement: Cutting out rotted plywood, installing new CDX decking, and reapplying ice barrier ranges from $65 to $110 per linear foot.
  • Metal Drip Edge Flashing Installation: Installing heavy aluminum drip edge along eave runs ranges from $5.00 to $8.50 per linear foot.
  • Valley Flashing Rebuild: Tearing out failed valley shingles, installing W-valley metal, and shingling closed-cut valleys ranges from $450 to $850 per valley.

Peter Palomeque personally inspects your roofline, explains your options, and provides an itemized proposal with clear, fixed pricing.

Iowa Building Codes, IRC R905 Flashing Mandates, and Contractor Licensing

Roofing and exterior repairs in Greater Des Moines must comply with state licensing statutes and residential building standards:

  • IRC Section R905 Compliance: All roof coverings, underlayments, and flashing must comply with International Residential Code standards, including mandatory drip edges and ice barriers in freeze climates.
  • Iowa Contractor Registration: Palomeque Gutter LLC is fully registered and bonded under Iowa Code Chapter 91C with the Iowa Division of Labor (Iowa SOS LLC #636243).
  • OSHA Fall Protection Standards: Our roofing crews follow OSHA 1926 Subpart M safety regulations, utilizing certified harnesses, ropes, and anchor points.
Fascia board and roof edge inspection for roofing & roof-edge repair
Thorough inspection of sub-fascia and drip edge integration during roof-edge repair.

Why Des Moines Homeowners Trust Palomeque Gutter LLC

Choosing Palomeque Gutter LLC means working directly with dedicated local tradesmen who take pride in lasting craftsmanship. Founded by Peter Palomeque in 2020 with exterior roots dating to 2014, we deliver five-star roofing care:

  • Direct Owner Supervision: Peter Palomeque personally oversees every repair, verifying underlayment, flashing, and shingle seals.
  • Integrated Exterior Mastery: We understand how roofs, drip edges, fascia boards, and seamless gutters function together.
  • Impeccable Five-Star Reputation: Over 45 verified 5-star Google reviews prove our honest recommendations and spotless cleanup across Central Iowa.
  • Honest Repair-First Approach: We never pressure you into an unnecessary full roof replacement when expert repairs will restore watertight integrity.

Verified Customer Reviews for Drainage and Gutter Services

Our commitment to five-star craftsmanship is proven by reviews from satisfied homeowners across Central Iowa:

"We had a persistent roof leak along our front eave that two other roofers couldn't fix. Peter inspected the decking, discovered rotted wood under the drip edge, replaced the plywood, and rehung our gutters. Bone dry ever since! Fantastic quality." — Kris Zuercher, Des Moines Homeowner

"Peter Palomeque repaired wind-damaged shingles on our two-story home in Ankeny and sealed the valley flashing. On time, professional, and very fairly priced. Highly recommend Palomeque Gutter LLC!" — Amy Wobbrock, Ankeny Homeowner

"Peter is honest, skilled, and reliable. He gave us an honest assessment of our roof edge and repaired it cleanly. Outstanding communication from start to finish." — Josh Larson, West Des Moines Property Owner

Schedule Your Roof-Edge Inspection in Greater Des Moines Today

Do not allow damaged shingles, missing drip edges, or rotted eave decking to compromise your home. Contact Palomeque Gutter LLC today at (321) 485-9911 to speak directly with owner Peter Palomeque. We provide honest roof assessments, transparent quotes, and expert roofing contractor des moines across Polk County, West Des Moines, Ankeny, Urbandale, Johnston, Waukee, and surrounding Central Iowa communities.

Local Service Radius

Where We Provide Roofing & Roof-Edge Repair

Polk County, IA

County-wide roofing, shingle repairs, and eave restoration engineered for severe Midwestern weather.

West Des Moines, IA

Repairing wind-creased architectural shingles and valley flashings near Valley Junction and Jordan Creek.

Ankeny, IA

Fixing storm-damaged shingles and installing drip edge aprons on newer two-story homes.

Urbandale, IA

Replacing decayed eave decking and repairing shingle edges on mid-century residential properties.

Johnston, IA

Repairing roof valleys and clearing moss accumulation beneath dense timber canopies near Beaver Creek.

Altoona, IA

Restoring wind-lifted shingles and eave flashings exposed to high open prairie wind shear.

Clive, IA

Precision roof flashing and architectural shingle repairs across Clive Greenbelt neighborhoods.

Norwalk, IA

Safeguarding hillside walkout rooflines from wind-driven rain and severe winter ice damming.

Pleasant Hill, IA

Repairing river valley storm damage and resealing roof-to-fascia transitions.

Windsor Heights, IA

Restoring vintage rooflines, chimney flashing, and eave sheathing on classic brick and frame homes.

Roofing & Roof-Edge Repair Frequently Asked Questions

Do you install new drip edge when repairing roof eaves and gutters?

Yes. Installing an IRC-compliant metal drip edge is standard on every roof-edge repair. A proper drip edge extends beneath the first row of shingles and directs roof runoff cleanly into the center of the gutter trough, preventing surface tension from pulling water behind the gutter where it rots the wood sub-fascia.

Can you repair water-damaged roof sheathing caused by ice dams or gutter overflow?

Yes. When water backs up under lower roof shingles, plywood or OSB decking rots along the perimeter eave. We carefully lift lower shingle courses, cut out soft, rotted decking lumber, install new CDX exterior-grade plywood, and seal the edge with self-adhering ice-and-water shield membrane.

Do you handle small localized shingle repairs or only full roof replacements?

We handle targeted shingle repairs, wind-creased shingle replacements, flashing repairs, and eave reconstructions, as well as complete reroofing projects. Many roof leaks occur at valleys, penetrations, or roof edges, which can be repaired expertly without requiring an expensive full roof replacement.

Should I replace gutters before or after installing a new roof?

You should install gutters immediately after the roof is installed. Roofers working on eaves frequently drop tools or step on gutter rims, damaging pre-existing troughs. Replacing the roof first allows us to install new drip edge flashing, ice barrier membranes, and seamless gutters in perfect alignment.

How can I tell if my roof leak is caused by shingles or gutter backup?

If water stains appear several feet inside your exterior wall, shingle failure, damaged flashing, or roof penetrations are usually the cause. If leaks occur along exterior walls, soffits, or window heads, the issue is typically eave ice damming, missing drip edge flashing, or clogged gutter overflow.

Ask the Crew Directly

Questions about roofing & roof-edge repair for your home?

Peter Palomeque is happy to answer any questions about seamless gutter sizing, downspout routing, guards, or insurance estimates.

Call (321) 485-9911 for Fast Answers
Zero Pressure · Free Estimates in Des Moines & Central Iowa

Schedule Your Free Roofing & Roof-Edge Repair Estimate

Call Palomeque Gutter LLC today to protect your roofline, siding, and foundation with durable seamless gutters.

5" & 6" Seamless Aluminum
Hidden Hangers with Screws
Soffit & Fascia Inspections
Complete Ground Cleanup
Ready to Schedule?
Talk Directly with Peter Palomeque
(321) 485-9911
Mon-Sat 7:00 AM – 7:00 PM · 24/7 Storm Response
Office: Des Moines, IA 50317